Aluminum-magnesium-manganese metal roof panels

Aluminum-magnesium-manganese metal roof panels is a high-performance building material mainly used for covering building roofs.It is made of alloy materials such as aluminum,magnesium,and manganese,and has the advantages of lightweight,corrosion resistance,good weather resistance,high strength,and good fire resistance.The installation process of this product is a meticulous process,mainly including the following steps:

1.Layout:The planar control of Aluminum-magnesium-manganese metal roof panels is achieved by positioning the fixed supports.

2.Installation in place:Lift the processed aluminum magnesium manganese alloy plate to the roof.

3.Occlusion:Press the edge into the front panel edge,and later check whether the edge is tightly combined.

4.Edge trimming:After adjusting the position of the Aluminum-magnesium-manganese metal roof panels,use a dedicated electric locking machine to lock the edges.The biting edge requires continuous smoothness,without distortion or cracks.The grinding edge needs to be clamped within 1mm before the grinding machine,which is also the key to the quality of mechanical grinding edge.

5.Installation of support:Set out the centerline and positioning line of the support base plate on the Z-shaped purlin as the fixing and control line for the support.

6.Install insulation cotton:The insulation cotton should be continuously spread over the compartment rack.

7.Install aluminum magnesium manganese roof panels:Lift the Aluminum-magnesium-manganese metal roof panels to the installation position.After positioning,align the control line at the end of the board first,then press the edge into the front board edge,and later check whether the edge is tightly combined.

8.Installation of edging:Install edging and corner wrapping for ridges,mountain walls,eaves,etc.

The above is the basic installation process of Aluminum-magnesium-manganese metal roof panels.It should be noted that safety operating procedures must be strictly followed during the installation process to ensure construction quality and the safety of construction personnel.